Service life of electronic crane scale
Author:jinmai Time:2019-05-29 10:29:33
When the electronic crane scale is used, the power supply may be provided by a battery, and some may be provided by a line.
After the improvement of the line, if it is a single line, it can provide good power protection. When installing the battery, pay attention
to the model of the battery. When charging the battery, every time you use the battery, you should also pay attention to whether
the battery has power. When using the electronic crane scale, you can make a separate wire to supply power to it, so that when it is used,
it will not cause problems due to too much power load.
At the height, it is also necessary to pay attention. In some factories, when they use the electronic crane scale, they need to transfer goods.
After lifting the goods, if the weight of the goods is too large, it will cause the problem of breakage in the clues. Every time you use the
electronic crane scale, you must ensure that the installation and binding parts are stable.
Some electronic crane scales require the use of a remote control when in use. At the beginning of the installation, the first step is to use
the remote control for calibration. Make sure that the remote control is well integrated with the electronic crane scale. Each model of the
remote control is opposite to the electronic crane scale. When used, a set of the same type can be used together.
The function of the electronic crane scale is still relatively comprehensive. From the beginning, it was only used to weigh the goods,
and now it can make some transfer of the goods, which plays a very good role. Every time you use the electronic crane scale, make
sure that the machine is running normally. After the machine has a problem, it is enough to replace the parts in time. Ensure the integrity
and integrity of the part each time it is installed.
When the electronic crane scale is not used in the regular period, the battery should be fully charged and then put away to avoid battery loss.